Cisco Systems WSC2960X48TDL Manuale Utente Pagina 45

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 108
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 44
DETAILED STEPS
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 1
Configures the console and enters line configuration mode.line console 0
Example:
Switch(config)# line console 0
Step 2
Configures the console media type to be only RJ-45 port. If
you do not enter this command and both types are connected,
the USB port is used by default.
media-type rj45
Example:
Switch(config-line)# media-type rj45
Step 3
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 4
Configuring the USB Inactivity Timeout
The configurable inactivity timeout reactivates the RJ-45 console port if the USB console port is activated
but no input activity occurs on it for a specified time period. When the USB console port is deactivated due
to a timeout, you can restore its operation by disconnecting and reconnecting the USB cable.
The configured inactivity timeout applies to all switches in a stack. However, a timeout on one switch
does not cause a timeout on other switches in the stack.
Note
Beginning in privileged EXEC mode, follow these steps to configure an inactivity timeout.
SUMMARY STEPS
1.
configure terminal
2.
line console 0
3.
usb-inactivity-timeout timeout-minutes
Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29034-01 33
Configuring Interface Characteristics
Configuring the USB Inactivity Timeout
Vedere la pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 107 108

Commenti su questo manuale

Nessun commento