Cisco Systems WSC2960X48TDL Manuale Utente Scaricare il pdf (Pagina 43)

PurposeCommand or Action

Excludes the access or trunk port when defining the status

of an SVI line state (up or down)

switchport autostate exclude

Example:

Switch(config-if)# switchport autostate

Step 3

exclude

Returns to privileged EXEC mode.end

Example:

Switch(config-if)# end

Step 4

(Optional) Shows the running configuration.

show running config interface interface-id

Step 5

Verifies the configuration.

Shutting Down and Restarting the Interface

Shutting down an interface disables all functions on the specified interface and marks the interface as unavailable

on all monitoring command displays. This information is communicated to other network servers through all

dynamic routing protocols. The interface is not mentioned in any routing updates.

SUMMARY STEPS

configure terminal

interface {vlan vlan-id} | {gigabitethernet interface-id} | {port-channel port-channel-number}

shutdown

no shutdown

end

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Selects the interface to be configured.

interface {vlan vlan-id} | {gigabitethernet interface-id} |

{port-channel port-channel-number}

Step 2

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 31

Configuring Interface Characteristics

Shutting Down and Restarting the Interface

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 107 108

Nessun commento

Cisco Systems WSC2960X48TDL Manuale Utente Pagina 43