Cisco Systems 4xGBE Guida Utente Scaricare il pdf (Pagina 76)

Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration

Initial System Configuration

SCE 2000 4xGBE Installation and Configuration Guide

5-12 OL-7824-02

Step 6: Configuring the RDR Formatter Destination

The SCE 2000 passes Raw Data Records (RDRs) to an external collection system via the RDR-

Formatter. In order for the data to reach the correct location, the IP address of the external

collection system and its port number must be configured.

To configure the RDR-formatter destination, complete the following steps:

Step 1 Enter the RDR formatter configuration menu.

Would you like to enter the RDR-formatter configuration menu? [no]: y

Type y and press Enter.

The RDR-formatter destination dialog begins.

Step 2

Type the IP address of the RDR-formatter destination and press Enter.

Enter RDR-formatter destination’s IP address:

Note that there is no default for this parameter.

Step 3

Type the TCP port number of the RDR-formatter destination and press Enter.

Note that there is no default for this parameter.

Enter RDR-formatter destination’s TCP port number:

EXAMPLE:

Following is a sample RDR-formatter configuration dialog, assigning the IP address and TCP port

number.

Would you like to enter the RDR-formatter configuration menu? [no]: y

Enter RDR-formatter destination’s IP address: 10.1.1.230

Enter RDR-formatter destination’s TCP port number: 33000

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 151 152

Nessun commento

Cisco Systems 4xGBE Guida Utente Pagina 76