Cisco Systems NSS2000 Series Guida di Avvio Rapido Pagina 9
- Pagina / 34
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Setting up the Hardware
Step 1 — Install the Disk Drives
NSS2000 Getting Started Guide 5
2
STEP 4 Apply even pressure to the both corners of the tray while you insert the tray fully
into position in the chassis.
STEP 5 When the disk drive is inserted all the way in, close the latch on the disk drive tray.
STEP 6 Repeat steps 1 to 5 for each disk drive you want to install.
STEP 7 Continue with Step 2 — Install the Ethernet Link.
Approved Vendor List for Drives
If you are purchasing disk drives to install in the NSS, refer to the product support
information offered on the Cisco website (www.cisco.com/go/smallbiz) for a list of
recommended disk drives.
When you select a disk drive, consider the type of RAID levels required to service
your business needs. For example, if you are creating a RAID (versus a JBOD),
make sure that each of the disks used in the array have the same disk capacity.
The RAID is built using the capacity of the smallest disk in the array.
270959
- Cisco Small Business 1
- GETTING STARTED 1
- Contents 3
- Chapter 1: Introduction 1 3
- Appendix D: Contacts 30 4
- Introduction 5
- About this Guide 6
- Setting up the Hardware 7
- Linksys by Cisco 8
- Step 3 — Install the Power 11
- Present on your Network 13
- STEP 4 Click Update 19
- STEP 7 Click Unmount 20
- Instructing your End Users 21
- STEP 3 Click OK 22
- LEDs & Buttons 27
- System LED (Front Panel) 28
- Reset Button (Front Panel) 29
- LAN LED (Front Panel) 29
- USB LED (Front Panel) 30
- UPS LED (Back Panel) 31
- Environmental Specifications 32
- Additional Information 33
- Contacts 34
Wentronic 77146 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Kabelmontagewerkzeuge Wentronic 77146.
Wir stellen 1 PDF-Handbücher Wentronic 77146 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Commenti su questo manuale